Shape Square type Sensing method Diffuse-reflective Sensing distance White paper 100 x 100 mm: 100 mm Differential distance 20% max. of sensing distance Light source Infrared LED (860 nm) Power supply voltage 12 to 24 VDC±10% ripple (p-p) 10% max. Current consumption 30 mA max. Control output PNP open collector 26.4 VDC max. 100 mA max. Residual voltage: 1 V max. (Load current Less than 10 mA) Residual voltage: 2 V max. (Load current 10 to 100 mA) Operation mode Light-ON/Dark-ON selectable Protective circuit Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection Response time Operate or reset: 1 ms max. Sensitivity setting Single-turn adjustment Ambient illuminance Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature range (Operating) -30 to 55 ℃ (with no freezing or condensation) Ambient temperature range (Storage) -40 to 70 ℃ (with no freezing or condensation) Ambient humidity range (Operating) 35 to 85 % (with no condensation) Ambient humidity range (Strage) 35 to 95 % (with no condensation) Insulation resistance 20 MΩ min. (500 VDC megger) Dielectric strength 1000 VAC 50/60 Hz 1 min Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h Shock resistance Destruction: 500 m/s2 3 times each in X, Y and Z directions Degree of protection IEC: IP67 Connection method M8 connector models Indicator Operation indicator (orange), Stability indicator (green) Weight Package: Approx. 20 g Accessories Instruction manual Material Case: Polybutylene terephthalate (PBT) Lens: Denatured Polyarylate read more

2711P-T10C21D8S PanelView Plus 7 Standard 10 Terminal read more

Shape Square type Sensing method Retro-reflective with M.S.R. function Sensing distance When using the E39-R1S: 100 mm to 4 m When using the E39-R1: 100 mm to 3 m Standard sensing object Opaque: 75 mm dia. min. Directional angle 2 to 10 ° Light source Red LED (660 nm) Power supply voltage 12 to 24 VDC±10% ripple (p-p) 10% max. Current consumption 30 mA max. Control output PNP open collector 26.4 VDC max. 100 mA max. Residual voltage: 1 V max. (Load current Less than 10 mA) Residual voltage: 2 V max. (Load current 10 to 100 mA) Operation mode Light-ON/Dark-ON selectable Protective circuit Output short-circuit protection, Output reverse polarity protection, Power supply reverse polarity protection Response time Operate or reset: 1 ms max. Sensitivity setting Single-turn adjustment Ambient illuminance Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature range (Operating) -40 to 55 ℃ (with no freezing or condensation) Ambient temperature range (Storage) -40 to 70 ℃ (with no freezing or condensation) Ambient humidity range (Operating) 35 to 85 % (with no condensation) Ambient humidity range (Strage) 35 to 95 % (with no condensation) Insulation resistance 20 MΩ min. (500 VDC megger) Dielectric strength 1000 VAC 50/60 Hz 1 min Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h Shock resistance Destruction: 500 m/s2 3 times each in X, Y and Z directions Degree of protection IEC: IP67 Connection method M8 connector models Indicator Operation indicator (orange), Stability indicator (green) Weight Package: Approx. 20 g Accessories Instruction manual Material Case: Polybutylene terephthalate (PBT) Lens: Methacrylate resin read more

Technical data   Control circuit Nominal input voltage UN 230 VAC Input voltage range ±10 % Nominal input current at UN 4 mA Load circuit Number of changeover/switchover contacts 2 Contact material (relay) AgNi 90/10 Limiting continuous current 8 A Inrush current (resistive) max. (AC) 15 A / 4 s Switching Voltage, Max. 250 VAC Switching power (resistive) max. AC 2000 VA; DC (see load limit curve) Switching capacity AC-15: 3 A / 250 VAC; DC-13: 2 A / 24 VDC Recommended minimum load 12 V / 10 mA Pull-in time (typ.) 10ms Drop-out time (typ.) 35ms Bounce time (typ.) 10ms Electrical life (NO; resistive load; 23 °C) 10 x 10³ switching operations Mechanical life 30 x 10⁶ switching operations Switching frequency with/without load (max.) 6 min-1 / 1200 min-1 Signaling Status indicator Red LED read more

General specifications Product Name Eaton Moeller® series DILM contactor Catalog Number 199238 Model Code DILM9-01(24VDC)-PI EAN 4015081973224 Product Length/Depth 75 mm Product Height 68 mm Product Width 45 mm Product Weight 0.285 kg Certifications IEC/EN 60947 VDE 0660 UL Listed CSA certified UL Category Control No.: NLDX CE marking UL File No.: E29096 CSA Class No.: 2411-03, 3211-04 CSA File No.: 012528 Catalog Notes Also tested according to AC-3e. Product Type Contactor Features Functions     Fitted with: Mirror contact Built-in suppressor circuit Number of poles Three-pole General Application Contactors for Motors Degree of protection IP20 Frame size FS1 Lifespan, mechanical 10,000,000 Operations (DC operated) Connection Push in terminals Operating frequency 9000 mechanical Operations/h (DC operated) Overvoltage category III Pollution degree 3 Product category Contactors Protection Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274) Rated impulse withstand voltage (Uimp) 6000 V AC Resistance per pole 4.6 mΩ Suitable for Also motors with efficiency class IE3 Utilization category AC-4: Normal AC induction motors: starting, plugging, reversing, inching AC-3: Normal AC induction motors: starting, switch off during running AC-1: Non-inductive or slightly inductive loads, resistance furnaces Voltage type DC read more

MODEL NO. CONTROL VOLTAGE RANGE MUST TURN OFF VOLTAGE INPUT IMPEDANCE MAX LOAD CURRENT LOAD VOLTAGE RANGE MIN BLOCKING VOLTAGE MAX OFF-STATE LEAKAGE FREQUENCY RANGE MAX 1-CYCLE PEAK SURGE KD40C75AX 4 TO 32 VDC MAX 1.0 VDC 1.5 Kohm 75A 48-480VAC 1200VAC LESS15mA 47~70Hz 750A MODEL NO. MAX OFF STATE dv/dt MAX ON-STATE VOLTAGE DROP ISOLATE IMPEDENCE DIELECTRIC STRENGTH INPUT-OUTPUT DIELECTRIC STRENGTH INPUT,OUTPUT-CASE TURN ON TIME TURN OFF TIME CAPACITANCE IN-OUT WEIGHT (g) KD40C75AX 200  SEC 2.0VACrms  ohm 4000 VACrms 2500 VAC (rms) LESS 2 mSec LESS 1/2 AC CYCLE LESS 15 PF 100 g read more

Output 3 Normally Open Number of outputs, safety related, undelayed, with contact 3 Number of outputs, safety related, delayed, with contact 0 Number of outputs, signalling function, undelayed, with contact 1 Number of outputs, safety related, undelayed, semiconductors 0 Number of outputs, safety related, delayed, semiconductors 0 Number of outputs, signalling function, undelayed, semiconductors 0 Number of outputs, signalling function, delayed, semiconductors 0 With start input False With muting function False Voltage type for actuating DC Rated control supply voltage at DC 24 V Model Basic device Type of electric connection Screw connection Evaluation inputs One- and two-channel Power consumption 3.5 W Operating voltage range 20.4 Continuous safety output current UL: C300, AC-15: 1.5 A/250V AC, DC-13: 2 A/24V DC (0.1 Hz) Wire size 0.2...2.5 mm² (24...14 AWG) Number of outputs, signalling function, delayed, with contact 0 With feedback circuit True Suitable for monitoring of magnetic switches True Suitable for monitoring of proximity switches True Suitable for monitoring of emergency-stop circuits True Suitable for monitoring of optoelectronic protection equipment True Suitable for monitoring of position switches True Suitable for monitoring of tactile sensors True Suitable for monitoring of valves True Surge auxillary output current duration, max 5 ms Aggregate current of outputs per module, max 6 A Surge Aux output current 700 mA Other input SWS input Other output SWS output With detachable clamps True Rated control supply voltage at AC 50 Hz 0 V Rated control supply voltage at AC 60 Hz 0 V Vibration 10...55 Hz, 0.35 mm Shock Shock proof, operating: 10 g, 16 ms Release-delay 0 s Rail mounting possible True Mechanical life operations 1.0E7 Enclosure protection IP40 (NEMA 1) read more

DD0203 D200/FR1A 110-240VAC 24VDC For detecting frequency, speed and rotational speed Reliable monitoring of overspeed or underspeed Easy setting of the switch point via potentiometer Clearly visible LEDs for displaying operation, function, switching status and release Particularly space-saving design Product characteristics Housing rectangular Dimensions[mm] 93 x 25.4 x 109.1 Application Design housing for DIN rail mounting Application universal evaluation of pulse sequences with regard to overspeed and underspeed; rotational speed monitoring Electrical data Operating voltage tolerance 2[%] > 20 Nominal voltage AC[V] 110...240 Nominal voltage DC[V] 27 Nominal voltage tolerance[%] > 20 Nominal voltage tolerance 2[%] 20...10 Nominal frequency AC[Hz] 50...60 Insulation rating[V] 9 Max. power consumption AC[W] 6 Max. power consumption DC[W] 4 Auxiliary energy for sensors DC[V] 18.5...30; (SELV, ≤ 100 mA) Inputs / outputs Number of inputs and outputs Number of digital outputs: 1; Number of relay outputs: 1 Outputs Number of digital outputs 1 Number of relay outputs 1 Contact rating 4 A (240 V AC); 6 A (30 V DC); (ohmic resistance) Short-circuit proof yes Measuring/setting range Setting range Hz[Hz] 0.1...1000 Accuracy / deviations Hysteresis[% of Sr] 1...100 Response times Start-up delay[s] 0.1...15 Software / programming Adjustment of the switch point potentiometer Operating conditions Ambient temperature[°C] -25...60 Storage temperature[°C] -25...70 Max. relative air humidity[%] 80; (40 °C: 50 % non condensing) Max. height above sea level[m] 2000 Protection IP 20 Protection rating terminals IP 20 Pollution degree 2; (≤ 240 V AC) Tests / approvals Approval UL: N001 MTTF[years] 190 Mechanical data Weight[g] 242 Housing rectangular Type of mounting mounting on DIN rail; (TH35 (EN 60715)) Dimensions[mm] 93 x 25.4 x 109.1 Materials housing: PC-GF20   read more

Technical data   General data Type Intensity difference Fiber optic sensor Sensing distance Tw 60 … 430 mm Sensing distance Tw (with doubling lense) 80 … 800 mm Alignment / soiled lens indicator Flashing light indicator Light indicator LED yellow Sensitivity adjustment Potentiometer, 270° Suppression of reciprocal influence Yes Light Source Light source Pulsed infrared diode Wave length 880 nm Electrical data Response time / release time < 1 ms Voltage supply range +Vs 10 … 30 VDC Current consumption max. (no load) 45 mA Current consumption typ. 30 mA Voltage drop Vd <1.8 VDC Output function Light operate Output circuit PNP Output current 200 mA Short circuit protection Yes Reverse polarity protection Yes Mechanical data Width / diameter 18 mm Height / length 50 mm Design Cylindrical threaded Housing material Brass nickel plated / PC Front (optics) PC Connection types Cable 3 pin, 2 m Ambient conditions Protection class IP 67 Operating temperature -25 … +55 °C   read more

Specifications     Product related Article number 3RT2046-1AL20 Life cycle status Active Product Product Family SIRIUS 3RT contactors, 3-pole, up to 250 kW EAN 4047621023953 UPC 804766406058 Commodity Code 85364900 Pricing related Customer Price – List Price – Price Group / Headquarter Price Group EP / 41B Surcharge for raw material Metal Factor LEO----- Delivery related Export Control Regulations AL : N / ECCN : N Standard delivery time 3 Day/Days Packaging dimensions (L x W x H) 167.00 x 161.00 x 81.00 mm Net weight 1.712 Kg Quantity Unit 1 Piece Packaging Quantity 1 Minimum Order Quantity 1 Dangerous goods Information Dangerous Goods Report Environment related WEEE (2012/19/EU) Take-Back Obligations Yes Compliance with the substance restrictions according to RoHS directive Since: 01.03.17 REACH Art. 33 Duty to inform according to the current list of candidates Reach Information SCIP Number not available Siemens specific Product Group 5370 Catalog ID CC-IC10 Group Code R711 Country of origin Germany read more