Technical Data Size6 SeriesMS Actuator lockRotary knob with detent can be closed with accessories Mounting positionVertical +/-5° Grade of filtration40 µm Condensate drainManual, non-detenting DesignFilter regulator with pressure gauge Max. condensate volume38 ml Controller functionOutput pressure constant With secondary venting Bowl guardPlastic bowl guard Degree of condensate separation>75 % Symbol00991587 Pressure gauge (ANALOG) or Pressure display (DIGITAL)With pressure gauge Operating pressure0.2 MPa ... 1.2 MPa Operating pressure2 bar ... 12 bar Pressure regulation range0.3 bar ... 7 bar Max. pressure hysteresis0.025 MPa Max. pressure hysteresis0.25 bar Max. pressure hysteresis3.625 psi Standard nominal flow rate (standardised to DIN 1343)6200 l/min Operating mediumCompressed air to ISO 8573-1:2010 [7:4:-] Inert gases Corrosion resistance class CRC2 - Moderate corrosion stress LABS (PWIS) conformityVDMA24364-B1/B2-L Storage temperature-10 °C ... 60 °C Suitable for use with foodSee supplementary material information Air purity class at outputCompressed air to ISO 8573-1:2010 [7:4:4] Media temperature-10 °C ... 60 °C Ambient temperature-10 °C ... 60 °C Pore size<40 µm Product weight875 g Type of mountingWith accessories Pneumatic connection, port 1G1/2 Pneumatic connection, port 2G1/2 Note on materialsRoHS-compliant Material control panelPA POM Material sealsNBR Material filterPE Material housingDie-cast aluminium Material membraneNBR Material bowlPC Material separating platePOM read more

Schneider LC1D50B7C Contactor Malaysia read more

Omron MY2N-GS 24VDC Relay Malaysia read more

Models H5CX-A11[]-N Classification Standard Type Ratings Power supply voltage *1 100 to 240 VAC 50/60 Hz 12 to 24 VDC/24 VAC 50/60 Hz Operating voltage fluctuation range 85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC) Power consumption Approx. 6.2 VA at 100 to 240 VAC, Approx. 5.1 VA/2.4 W at 24 VAC/12 to 24 VDC *2 Mounting method Flush mounting, surface mounting, DIN track mounting External connections 11-pin socket Degree of protection IEC IP66, UL508 Type 4X (indoors) for panel surface only and when Y92S-29 Waterproof Packing is used Digits 4 digits Time ranges 0.001 s to 9.999 s, 0.01 s to 99.99 s, 0.1 s to 999.9 s, 1 s to 9999 s, 1 s ti 99 min 59 s 0.1 m to 999.9 min, 1 min to 9999 min, 1 min to 99 h 59 min, 0.1 h to 999.9 h, 1 h to 9999 h Timer mode Elapsed time (Up), remaining time (Down) (selectable) Inputs Input signals Signal, Reset, Gate Input method No-voltage (NPN) input/ voltage (PNP) input (switchable) No-voltage Input ON impedance: 1 kΩ max. (Leakage current: 12 mA when 0 Ω) ON residual voltage: 3 V max. OFF impedance: 100 kΩ min. Voltage Input High (logic) level: 4.5 to 30 VDC Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 kΩ) Signal, reset, gate Minimum input signal width: 1 or 20 ms (selectable, same for all input) Reset system Power reset (depending on output mode), external reset, manual reset, automatic reset (depending on output mode) Power reset Minimum power-opening time: 0.5 s (except for A-3, b-1, F, ton-1, and toff-1 mode) Reset voltage 10% max. of rated supply voltage Sensor waiting time 250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.) Output Output modes A: Signal ON Delay I, A-1: Signal ON Delay II, A-2: Power ON Delay I, A-3: Power ON Delay II, b: Repeat Cycle 1, b-1: Repeat Cycle 2, d: Signal OFF Delay, E: Interval, F: Cumulative, Z: ON/OFF-duty-adjustable flicker, S: Stopwatch, toff: Flicker OFF Start 1, ton: Flicker ON Start 1, toff-1: Flicker OFF Start 2, ton-1: Flicker ON Start 2 One-shot output time 0.01 to 99.99 s Control output Models with Contact Outputs 5 A at 250 VAC/30 VDC, resistive load (cos =1) Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value) Contact materials: AgSnIn Transistor output: NPN open collector, 100 mA at 30 VDC max., residual voltage: 1.5 VDC max. (Approx. 1 V), Leakage current: 0.1 mA max. Display method *3 7-segment, negative transmissive LCD; Present value: 12-mm-high characters, red Set value: 6-mm-high characters, green Memory backup EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min. Operating temperature range -10 to 55°C (-10 to 50°C if counters are mounted side by side) (with no icing or condensation) Storage temperature range -25 to 70°C (with no icing or condensation) Operating humidity range 25% to 85% Case color Black (N1.5) (Optional Front Panels are available to change the Front Panel color to light gray or white.) Attachments Label for DIP switch settings read more

SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted. SMC Part Description:tab 4 VALVE, SGL SOL, BODY PT (DC) SMC Products Line:tab 5 VALVE SMC Family:tab 1 SY3000 SOL/VALVE, RUBBER SEAL SMC Family Code:tab 11 BD SMC Class Description:tab 8 SY BODY PORT (M5, NON-US STD) Weight:tab 9 .12703 lb read more

     Range of product                                                                                                                               Telemecanique Limit switches XC Standard Series name Standard format Product or component type Limit switch body Device short name ZCKJ Body type Fixed Product compatibility XCKJ Body material Metal Cable entry 1 entry tapped for Pg 13.5 cable gland Contacts type and composition 1 NC + 1 NO Contact operation Snap action Contacts material Silver plated contacts read more