Specifications: Fluke Networks MicroScanner™ Cable Verifier Specifications apply at 23 °C (73 °F), unless otherwise noted. Environmental specifications Operating temperature 32 °F to 113 °F (0 °C to 45 °C) Storage temperature -4 °F to +140 °F (-20 °C to +60 °C) Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C) 75 % (95 °F to 113 °F 35 °C to 45 °C) Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop test with and without wiremap adapter attached Safety IEC 61010-1 3rd Edition Altitude 4,000 m; Storage: 12,000 m EMC IEC 61326-1 General specifications Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable. Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner2: 10.6 oz (300 g) Display Monochrome LCD with backlight Test modes Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen. Tone Generates Intellitone™ and normal analog toning signals PoE MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices Performance specifications Cable types tested Twisted pair: UTP, FTP, SSTP Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω Length test Range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error. Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable. Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults. Ethernet port detection MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps. Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.
read more
