Technical attributes 3/2 - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | 2,00 mm (5/64 inch) | 0,00 bar - 16,00 bar | Brass | Flanged | 230,00 V - 230,00 V | NBR (Nitrile rubber) | 0,00 °C - 80,00 °C | Valve complete read more

Item Specifications Product Number SU-7 Part Number SU-7 Product details Standard type / NPN output Applicable sensor head SH series Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less Current consumption 35 mA or less Sensing output <NPN output type> NPN open-collector transistor ·Maximum sink current: 100 mA ·Applied voltage: 30 V DC or less (between sensing output and 0 V) ·Residual voltage: 1.0 V or less (at 100 mA sink current)         0.4 V or less (at 16 mA sink current) Sensing output:Output operation Selectable either Light-ON or Dark-ON with the ON and OFF buttons Sensing output:Short-circuit protection Incorporated Self-diagnosis output <NPN output type> NPN open-collector transistor ·Maximum sink current: 50 mA ·Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ·Residual voltage: 1.0 V or less (at 50 mA sink current)         0.4 V or less (at 16 mA sink current) Self-diagnosis output:Output operation ON under unstable sensing condition (restored automatically after 40 ms approx.), or if the sensing output is short-circuited (restored when short-circuit is rectified). (For the remote sensitivity adjustment type, it turns ON for 40 ms approx. Also after the remote sensitivity input is received.) Self-diagnosis output:Short-circuit protection - Response time 0.6 ms or less (0.8 ms or less when the interference prevention function is used) Operation indicator Red LED (lights up when the sensing output is ON) Stability indicator Green LED (''RUN'' mode: Lights up under stable light received condition or stable dark condition ''SET'' mode: At the time of sensitivity setting, blinks twice when the difference between ON and OFF levels is greater than the hysteresis, but blinks 15 times when it is equal to or less than the hysteresis. Also blinks twice after the interference prevention is set ''SET'' mode → When ''SIF'' or ''RUN'' mode is selected: Blinks from 0 to 5 times according to the sensitivity margin) Test input (emission halt) function - External synchronization function - Remote sensitivity setting function - Remote sensitivity selection function - Sensitivity shift & limit sensitivity setting functions Shifts the set sensitivity level Automatic interference prevention function Incorporated Timer function ON-delay / OFF-delay timer (variable 0 to 5 sec.) Ambient temperature -10 to +55 ℃ +14 to +131 read more

Fluid: air/inert gas Operating pressure range: 0.15 - 1.0MPa Effective area mm 2 (Cv): 2 position metal seal 36.0 (2.0); 2 position rubber seal 39.6 (2.2) 3 position metal seal 19.8 - 36.0 (1.1 - 2.0); 3 position rubber seal 21.6 - 39.6 (1.2 - 2.2) Coil rated voltage: 12, 24VDC; 100, 110, 200, 220VAC Response time (ms) standard 1W: metal seal 12 or less to 55 or less; rubber seal 15 or less to 62 or less Ambient and fluid temperature: metal seal -10 to 50 C; rubber seal -5 to 50 C Optional IP65 enclosure read more

Technical Data Power Supply 18...30 VDC Sensor Current per Connector <120mA Output Current <1,4A Protection Class IP67 Temperature Range 0...55'c read more

product brand name Class 42 DP Contactors design of the product Non-reversing Definite Purpose Contactor special product feature Snap on auxiliary contacts, enclosed body design General technical data weight [lb] 1.04 lb(av) Height x Width x Depth [in] 3.69 × 2.38 × 2.87 in touch protection against electrical shock Not finger-safe ambient temperature [°F]   ● during storage 158 °F ● during operation 158 ... 158 °F ambient temperature   ● during storage 75 °C ● during operation 70 ... 70 °C country of origin China number of poles for main current circuit 3 Horsepower ratings yielded mechanical performance [hp] for 3-phase AC motor   ● at 460/480 V rated value 10 hp ● at 575/600 V rated value 15 hp Contactor size of contactor 30A number of NO contacts for main contacts 3 operating voltage for main current circuit at AC at 60 Hz maximum 600 V operational current at AC at 600 V rated value 120 A mechanical service life (operating cycles) of the main contacts typical 250000 Auxiliary contact number of NC contacts for auxiliary contacts 4 number of NO contacts for auxiliary contacts 4 number of NC contacts at contactor for auxiliary contacts 0 number of NO contacts at contactor for auxiliary contacts 0 number of total auxiliary contacts maximum 4 operational current of auxiliary contacts of contactor   ● at AC at 600 V 10 A contact rating of auxiliary contacts of contactor according to UL 10A@600VAC (A600), 11A 1/2HP 125-250VAC, 0.6A 125VDC, 0.3A 250VDC Coil control supply voltage   ● at AC at 50 Hz rated value 24 V ● at AC at 60 Hz rated value 24 V Enclosure degree of protection NEMA rating of the enclosure Open device (no enclosure) Mounting/wiring mounting position vertical fastening method Surface mounting and installation type of electrical connection for supply voltage line-side Screw-type terminals tightening torque [lbf·in] for supply 40 ... 40 lbf·in type of connectable conductor cross-sections at line-side for AWG cables single or multi-stranded 8 AWG type of electrical connection for load-side outgoing feeder Screw-type terminals type of connectable conductor cross-sections for AWG cables for load-side outgoing feeder single or multi-stranded 8 AWG type of electrical connection of magnet coil Quick connects, Screw-type terminals type of electrical connection for auxiliary and control circuit Quick Connects, Screw-type terminals type of electrical connection at contactor for auxiliary contacts Screw-type terminals Certificates/ approvals certificate of suitability cRUus, ARI 780 & 790, UL File E14900 read more

Specifications   Shape Cylindrical axial Sensing method Diffuse reflective Sensing distance 300 mm Setting method Manual adjustment Connection method Cable Cable length 2 m Output type PNP Operation mode Dark-ON, Light-ON Response time 0.5 ms Material housing ABS Thread size M18 Product Length (unpacked) 41 mm Type of light Infrared light Power supply voltage 10-30 V Degree of protection (IP) IP67/IP69K read more

Technical Data DesignPiston gate valve Type of actuationElectric Sealing principleSoft Exhaust-air functionWithout flow control option Manual overrideDetenting Type of resetMechanical spring Type of pilotingPilot actuated Symbol00991008 Valve function3/2-way, closed, monostable Operating pressure0.25 MPa ... 1.6 MPa Operating pressure2.5 bar ... 16 bar lapOverlap Duty cycle100% Characteristic coil data24 V DC: 2.5 W Permissible voltage fluctuations+/- 10 % Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4] Inert gases Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required) Corrosion resistance class CRC2 - Moderate corrosion stress Note on materialsRoHS-compliant LABS (PWIS) conformityVDMA24364-B1/B2-L Media temperature-10 °C ... 60 °C Ambient temperature-10 °C ... 60 °C Type of mountingIn-line installation With accessories Mounting positionoptional Flow directionNon-reversible Product weight800 g Pneumatic connection, port 3G3/8 Air purity class at outputCompressed air to ISO 8573-1:2010 [7:4:4] Inert gases Electrical connectionType C Plugs To DIN EN 175301-803 Signal status displayWith accessories Material sealsNBR Material housingDie-cast aluminium read more

Specifications Pattern 2-way Kvs 25 m³/h Fluid Water, water with glycol up to max. 50% vol. Fluid temperature 0...180°C [32...356°F] Flow characteristic {Tools} Equal percentage Leakage rate {Tools} Max. 0.01% of the Kvs value Pipe connection Flange     read more

Type Standard type Model NPN Cable type BRF-N Light source Red LED Response time 250 μs Distance adjustment 10-turn potentiometer Indicators Output indicator (orange LED), stable indicator (green LED) Control output NPN/PNP type open collector Max. 100 mA/30 VDC Timer function OFF delay 40 ms fixed (can be released) Output mode Light ON / Dark ON selectable Connection type Cable type: Cable length: 2 m, ø3.8 mm / Connector type: M8, 4-pin Insulation resistance 20 MΩ or more (with 500 VDC) Rating Supply voltage 10 to 30 VDC, including 10% ripple (p-p) Current consumption 25 mA or less (with 12 VDC) Applicable regulations EMC directive (2004/108/EC) Applicable standards EN 60947-5-2 Company standards Noise resistance: Feilen Level 3 cleared Environmental resistance Ambient temperature/humidity -25 to +55℃ (no freezing) / 35 to 85% RH (no condensation) Ambient illuminance Sunlight: 10,000 lx Incandescent lamp: 3,000 lx Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions Shock resistance Approx. 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions Degree of protection IEC standard, IP66 Material Housing: PBT cover: Polycarbonate Weight without cable Cable type: Approx. 20 g / Connector type: Approx. 20 g Included accessories Mounting bracket read more