Categorise Incremental Shaft model Diameter 40 mm dia. Power supply voltage 5 to 24 VDC (-5% to +15%) Ripple (p-p) 5% max. Current consumption 80 mA max. Resolution 1000 P/R Inrush current Approx. 9 A (0.3 ms) Output phases A, B and Z Control output Output type NPN open collector Load power supply voltage 30 V max.DC Sink current 35 mA max. Residual voltage 0.4 V max. (at sink current 35 mA) Starting positional point Equipped Max. response frequency 100 kHz Phase difference on output 90±45 ° between A and B (1/4 T ± 1/8 T) Rise and fall times of output 1 µs max. (Cable length: 2 m max., output voltage: 5 V, load resistance: 1 kΩ) Starting torque 0.98 mN.m max. Moment of inertia 1 x 10-6 kg.m2 max. Shaft loading Radial: 30 N Thrust: 20 N Max. permissible rotation 6000 r/min Protective circuit Output short-cut protection Power supply reverse polarity protection Ambient temperature Operating: -10 to 70 ℃ (with no icing) Storage: -25 to 85 ℃ (with no icing) Ambient humidity Operating: 35 to 85 % (with no condensation) Storage: 35 to 85 % (with no condensation) Insulation resistance Between charged parts and the case: 20 MΩ or higher (500 VDC megger) Dielectric strength Between charged parts and the case: 500 VAC 50/60 Hz 1 min Vibration resistance Destruction: 10 to 500 Hz, 2-mm or 150 m/s2 double amplitude for 11 min 3 times each in X, Y, and Z directions Shock resistance Destruction: 1000 m/s2 for 3 times each in X, Y, and Z directions Degree of protection IEC: IP50 Connection method Pre-wired models (Cable length: 2 m) Material Case: ABS Main Unit: Aluminum Shaft: SUS420J2 Accessories Instruction manual, Couplings, Hex-head spanner read more

Honeywell Snap-Action Limit Switch, 600V AC, 250V DC - HDLS Series - LSA1A Use this limit switch from Honeywell to speed up the switching capabilities of your electrical devices. It has a snap-action mechanism that ensures rapid switching. The durable zinc housing material makes it resistant to corrosion, impact and vibration for use in heavy-duty applications. Thanks to its wide operating temperature range of -12°C to +121°C, it's suitable for use in both hot and cold environments. A long mechanical lifespan of up to 50 million cycles ensures long-lasting and reliable performance. Features & Benefits • Voltage rating of 600V AC for use in high-power systems • Compact dimensions of 106.78 (length) x 41.1 (width) x 61.9mm (depth) for use in areas with limited space • IP67 (ingress protection) rating for protection against dust and submersion in 1m of water for up to 30 minutes Applications • Power plants • Production lines • Transportation hubs How do I install this limit switch? You can install this limit switch in your system using a plug-in method. It also features two screw holes on its front and back for simple, secure mounting that won't easily come loose, even in the event of heavy vibrations. Approvals UL, CSA. read more

Incremental encoders HOG9 DN 1024 I 16H7 Article no.: 11075601 Blind hollow shaft, 1024 pulses per revolution Optical sensing method Output stage HTL with power linedriver HTL output driver for cable length up to 350 m Operating temperature up to +100 °C Hybrid bearing for extended service life read more