Guided drive

DFM-20-30-P-A-GF

Technical Data

• Distance of centre of gravity of payload to yoke plate xs50 mm
• Stroke30 mm
• Piston diameter20 mm
• Drive unit operating modeYoke
• CushioningElastic cushioning rings/pads at both ends
• Mounting positionAny
• GuideSliding guide
• Structural designGuide
• Position sensingFor proximity sensor
• Symbol00991737
• Operating pressure0.2 MPa ... 1 MPa
• Operating pressure2 bar ... 10 bar
• Max. speed0.8 m/s
• Mode of operationDouble-acting
• Operating mediumCompressed air as per ISO 8573-1:2010 [7:4:4]
• Information on operating and pilot mediaOperation with oil lubrication possible (required for further use)
• Corrosion resistance class (CRC)1 - Low corrosion stress
• LABS (PWIS) conformityVDMA24364-B1/B2-L
• Cleanroom classClass 6 according to ISO 14644-1
• Ambient temperature-20 °C ... 80 °C
• Impact energy in the end positions0.2 J
• Max. force Fy354.7 N
• Max. force Fy static354.7 N
• Max. force Fz354.7 N
• Max. force Fz static354.7 N
• Max. torque Mx10.29 Nm
• Max. static moment Mx10.29 Nm
• Max. torque My3.37 Nm
• Max. static moment My3.37 Nm
• Max. torque Mz3.37 Nm
• Max. static moment Mz3.37 Nm
• Max. permissible torque load Mx as a function of the stroke1.36 Nm
• Max. payload as a function of the stroke at defined distance xs27 N
• Theoretical force at 6 bar, retracting141 N
• Theoretical force at 6 bar, advancing188 N
• Moving mass415 g
• Product weight850 g
• Alternative connectionsSee product drawing
• Pneumatic connectionM5
• Note on materialsRoHS-compliant
• Cover materialWrought aluminum alloy
• Seals materialNBR
• Housing materialWrought aluminum alloy
• Piston rod materialHigh-alloy stainless steel