SJT SUCCESS INDUSTRIAL AUTOMATION SDN BHD 956994-D

SJT SUCCESS INDUSTRIAL SUPPLIES 002854041-U

62, Jalan Resak 1/KS7, Bandar Botanik, 41200 Klang, Selangor, Malaysia.

+603-3884 0441

sales@sjtsuccess
.com.my

+60126186063

IFM SA5000 FLOW SENSOR

5 / 6

Flow sensor

SA5000

SAD10XDBFRKG/US-100

Measurement of flow and temperature at the same time
Optimised for water, oils and air
Red/green display for clear identification of the acceptable range
With switching output, analogue signal and IO-Link
The process connection can be rotated for optimum alignment

Convenient operation via buttons or parameter setting via IO-Link

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Process connection	threaded connection M18 x 1,5 internal thread

Application

Special feature

Gold-plated contacts

Media

water; glycol solutions; air; oils

Note on media

low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C)

high-viscosity oils with viscosity: > 40 mm²/s (40 °C)

Medium temperature[°C]

-20...90

Pressure rating[bar]

100

Pressure rating[MPa]

MAWP (for applications according to CRN)[bar]

100

Electrical data

Operating voltage[V]	18...30 DC
Current consumption[mA]	< 100
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s]	10
Measuring principle	calorimetric

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V]	2.5
Permanent current rating of switching output DC[mA]	250
Number of analogue outputs	1
Analogue current output[mA]	4...20; (scalable)
Max. load[Ω]	350
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Frequency of the output[Hz]	0...1000

Measuring/setting range

Probe length L[mm]	45
Operating mode	relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended; Factory setting: relative)

Temperature monitoring
Measuring range[°C]	-20...90
Resolution[°C]	0.2

Liquid media - absolute operating mode
Setting range[m/s]	0.04...3
Greatest sensitivity[m/s]	0.04...3

Liquid media - relative operating mode
Setting range[m/s]	0.04...6
Greatest sensitivity[m/s]	0.04...3

Gases - operating mode ''absolute''
Setting range[m/s]	0...100
Greatest sensitivity[m/s]	30...100

Gases - operating mode ''relative''
Setting range[m/s]	0...200
Greatest sensitivity[m/s]	30...100

Accuracy / deviations

Temperature drift[cm/s x 1/K]	0,003 m/s x 1/K (< 20 °C; > 70 °C)
Temperature gradient[K/min]	100

Absolute operating mode
Repeatability	0,05 m/s; (water; flow velocity: 0,05...3 m/s)

Relative operating mode
Accuracy	± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 20...70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Repeatability	0,05 m/s; (water; flow velocity: 0,05...3 m/s)

Temperature monitoring
Temperature drift	± 0,005 K/°C
Accuracy[K]	± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air; flow velocity: > 10 m/s)

Response times

Response time[s]	0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)

Response time[s]

0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)

Temperature monitoring
Dynamic response T05 / T09[s]	1,5 (T09); (water; flow velocity: 0,3...3 m/s)

Software / programming

Parameter setting options	hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour

Parameter setting options

hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time[ms]

Supported DeviceIDs

Type of operation	DeviceID
Factory setting / ModE = (REL)	533
ModE = (GAS)	547
ModE = (LIQU)	540

Operating conditions

Ambient temperature[°C]	-40...80
Storage temperature[°C]	-40...100
Protection	IP 65; IP 67

Tests / approvals

EMC

DIN EN 60947-5-9

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10...2000 Hz)

MTTF[years]

132

UL approval

UL Approval no.	I003
File number UL	E174189

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*